In order to maintain and clean your sprayer for long-term use, here are some key steps and recommendations:
Daily Maintenance:
Cleaning the sprayer: After each use of the sprayer, it should be cleaned in time to avoid the residual liquid inside and outside of the sprayer, so as to avoid the corrosive effect of the liquid on the sprayer. When cleaning, you can use water to rinse, avoid the use of strong acid and alkali and other irritating cleaning agents.
Checking the sprayer: Before each use, the sprayer should be thoroughly inspected, including whether nozzles, valves, pipes and other parts are intact and whether there is any leakage. If there is any problem, it should be replaced or repaired in time.
Storing the sprayer: When the sprayer is not in use, it should be stored in a dry and ventilated place, avoiding direct sunlight and humid environment. At the same time, sprayers should avoid mixing with pesticides, fertilizers and other chemicals to avoid potential safety hazards.
Regular Maintenance:
Replacement of wearing parts: During the use of the sprayer, some wearing parts, such as nozzles, seals, etc., will gradually wear out and should be replaced in time. When replacing, you should choose the products of regular manufacturers with reliable quality and install them according to the instructions.
Lubrication and maintenance: the various moving parts of the sprayer, such as the pump body, valves, etc., should be regularly coated with an appropriate amount of lubricant to reduce friction and improve service life.
Cleaning the pipeline: The pipeline of the sprayer may accumulate some residues after a period of use, affecting the spraying effect. Therefore, the pipeline should be cleaned regularly, which can be done with special cleaning agent or high pressure gas.
Safety Maintenance:
Avoid high temperature: When the sprayer is working in a high temperature environment, care should be taken to prevent overheating, so as not to cause safety accidents. In hot weather, the frequency of use of the sprayer can be appropriately reduced or other cooling measures can be taken.
Avoid collision: During the use of the sprayer, collision with hard objects should be avoided so as not to damage its structure or affect the use of the effect. When carrying or storing the sprayer, it should be lightly held and put down to avoid violent vibration.
Keep away from sources of ignition: Flammable and explosive pesticides or other liquids may remain in the aerosol dispenser, so when using or storing the aerosol dispenser, it should be kept away from sources of ignition in order to avoid causing fires or explosions.
Deutsch 
English 
العربية 
Bahasa Indonesia 
Tiếng Việt 
Nederlands 
فارسی 